FASTX*

[ Program Manual | User's Guide | Data Files | Databases ]

Table of Contents
FUNCTION
DESCRIPTION
EXAMPLE
OUTPUT
INPUT FILES
RELATED PROGRAMS
RESTRICTIONS
ALGORITHM
CONSIDERATIONS
SUGGESTIONS
ACKNOWLEDGEMENT
COMMAND-LINE SUMMARY
LOCAL DATA FILES
PARAMETER REFERENCE

FUNCTION

[ Top | Next ]

FastX does a Pearson and Lipman search for similarity between a nucleotide query sequence and a group of protein sequences, taking frameshifts into account. FastX translates both strands of the nucleic sequence before performing the comparison. It is designed to answer the question, "What implied protein sequences in my nucleic acid sequence are similar to sequences in a protein database?"

DESCRIPTION

[ Previous | Top | Next ]

FastX uses the method of Pearson and Lipman (Proc. Natl. Acad. Sci. USA 85; 2444-2448 (1988)) to search for similarities between a nucleic acid sequence (the query) and any group of protein sequences. Like FrameSearch, it is especially useful when the nucleotide query contains sequencing errors that cause frameshifts that would flaw the translated sequence so that it wouldn't find matches using a protein-protein search method such as FastA. FastX is faster than FrameSearch, but not as sensitive.

In the first step of this search, the comparison can be viewed as a set of dot plots, with the query as the vertical sequence and the group of sequences to which the query is being compared as the different horizontal sequences. This first step finds the registers of comparison (diagonals) having the largest number of short perfect matches (words) for each comparison. In the second step, these "best" regions are rescored using a scoring matrix that allows conservative replacements, ambiguity symbols, and runs of identities shorter than the size of a word. In the third step, the program checks to see if some of these initial highest-scoring diagonals can be joined together. Finally, the search set sequences with the highest scores are aligned to the query sequence for display.

What is a Word?

A word is any short sequence (n-mer or k-tuple) where you have set n to some small integer less than or equal to six. The word GGATGG is one of the 4,096 possible words of length six that can be created from an alphabet consisting of the four letters G, A, T, and C. The word QL is one of the 400 possible words of length two that you can make with the 20 letters of the amino acid alphabet.

EXAMPLE

[ Previous | Top | Next ]

Here is a session using FastX to identify sequences in the PIR protein sequence database that are similar to a fragment of a human globin coding region that contains frameshifts:


% fastx

 FASTX with what query sequence ?  singlepass.seq

                  Begin (* 1 *) ?
                End (*   102 *) ?

 Search for query in what sequence(s) (* PIR:* *) ?

 What word size (* 2 *) ?

 Don't show scores whose E() value exceeds: (* 2.0 *):

 What should I call the output file (* singlepass.fastx *) ?

          1 Sequences         105 aa searched    PIR1:CCHU
        501 Sequences      93,217 aa searched    PIR1:IHQFT

        ///////////////////////////////////////////////////

 CPU time used:
       Database scan:  0:02:29.6
Post-scan processing:  0:00: 4.5
      Total CPU time:  0:02:34.1
 Output File: singlepass.fastx

%

OUTPUT

[ Previous | Top | Next ]

The output from FastX is a list file, and is suitable for input to any GCG program that allows indirect file specifications. (For information about indirect file specification, see Chapter 2, Using Sequence Files and Databases of the User's Guide.)

Here is some of the output file:


!!SEQUENCE_LIST 1.0

(Nucleotide) FASTX of: singlepass.seq  from: 1 to: 102  September 25, 1998 13:36

A fragment of ggammacod.seq with simulated frameshift errors.
Human fetal beta globins G and A gamma
from Shen, Slightom and Smithies,  Cell 26; 191-203.
Analyzed by Smithies et al. Cell 26; 345-353.

 TO: PIR:*  Sequences:    109,075  Symbols: 34,814,664  Word Size: 2

 Databases searched:
   NBRF, Release 57.0, Released on 30Jun1998, Formatted on 18Aug1998

 Searching with both strands of the query.
 Scoring matrix: GenRunData:Blosum50.Cmp
 Constant pamfactor used
 Gap creation penalty: 15  Gap extension penalty: 2  Frameshift penalty: 20

Histogram Key:
 Each histogram symbol represents 327 search set sequences
 Each inset symbol represents 7 search set sequences
 z-scores computed from opt scores

z-score obs    exp
        (=)    (*)

< 20  1731     0:======
  22     6     0:=
  24    44     0:=
  26    93     5:*
  28   246    49:*
  30   664   300:*==
  32  1804  1160:===*==
  34  4373  3146:=========*====
  36  7914  6461:===================*=====
  38 12508 10677:================================*======
  40 17296 14893:=============================================*=======
  42 19386 18205:=======================================================*====
  44 19567 20082:===========================================================*
  46 19089 20454:===========================================================*
  48 17629 19583:======================================================     *
  50 15834 17869:=================================================     *
  52 14363 15710:============================================    *
  54 12398 13419:======================================   *
  56 10183 11209:================================  *
  58  8834  9202:============================*
  60  7074  7455:======================*
  62  5747  5976:==================*
  64  4660  4753:==============*
  66  3865  3757:===========*
  68  3084  2955:=========*
  70  2187  2316:=======*
  72  1735  1809:=====*
  74  1306  1411:====*
  76  1079  1098:===*
  78   868   853:==*
  80   559   663:==*
  82   467   507:=*
  84   352   402:=*
  86   239   311:*
  88   178   240:*
  90   131   186:*
  92    92   144:*         :==============      *
  94    80   111:*         :============   *
  96    33    86:*         :=====       *
  98    28    67:*         :====     *
 100    27    52:*         :====   *
 102     8    40:*         :==   *
 104    15    31:*         :=== *
 106     5    24:*         :=  *
 108     7    18:*         := *
 110     4    14:*         :=*
 112     7    11:*         :=*
 114     3     9:*         :=*
 116     2     7:*         :*
 118     2     5:*         :*
>120   344     4:*=        :*=======================================

Joining threshold: 36, opt. threshold: 24, opt. width:  16, reg.-scaled

The best scores are:                    init1 initn   opt    z-sc E(217753)..

PIR2:A30213
! hemoglobin epsilon chain - North Am...  130   130   141   223.3  2.7e-05
PIR1:HGMQP
! hemoglobin gamma chain - pig-tailed...  129   129   140   221.8  3.3e-05
PIR1:HGBAY
! hemoglobin gamma chain - yellow baboon  129   129   140   221.8  3.3e-05

//////////////////////////////////////////////////////////////////////////

\\End of List

singlepass.seq
PIR2:A30213

P1;A30213 - hemoglobin epsilon chain - North American opossum
C;Species: Didelphis virginiana, Didelphis marsupialis virginiana (North
 American opossum)
C;Date: 18-Oct-1989 #sequence_revision 18-Oct-1989 #text_change 21-Nov-1997
C;Accession: A30213
R;Koop, B.F.; Goodman, M.
Proc. Natl. Acad. Sci. U.S.A. 85, 3893-3897, 1988 . . .

SCORES   Init1: 130   Initn: 130   Opt: 141   z-score: 223.3 E(): 2.7e-05
Smith-Waterman score: 141;    76.5% identity in 34 aa overlap

                10        20        30       39
singlepass.s LVVYP/WTQRFV\DSFGNLSSASASWATPXVKAH
             ||||| |||||  |||||||||||  ::| ||||
A30213       LVVYP-WTQRFF-DSFGNLSSASAVMGNPKVKAH
                    40         50        60

//////////////////////////////////////////////////////////////////////////

! Distributed over 1 thread.
!      Start time: Fri Sep 25 13:32:20 1998
! Completion time: Fri Sep 25 13:39:08 1998

! CPU time used:
!        Database scan:  0:02:29.6
! Post-scan processing:  0:00:04.5
!       Total CPU time:  0:02:34.1
! Output File: singlepass.fastx

What is the Output?

The first part of the output file contains a histogram showing the distribution of the z-scores between the query and search set sequences. (See the ALGORITHM topic for an explanation of z-score.) The histogram is composed of bins of size 2 that are labeled according to the higher score for that bin (the leftmost column of the histogram). For example, the bin labeled 24 stores the number of sequence pairs that had scores of 23 or 24.

The next two columns of the histogram list the number of z-scores that fell within each bin. The second column lists the number of z-scores observed in the search and the third column lists the number of z-scores that were expected.

The body of the histogram displays a graphical representation of the score distributions. Equal signs (=) indicate the number of scores of that magnitude that were observed during the search, while asterisks (*) plot the number of scores of that magnitude that were expected.

At the bottom of the histogram is a list of some of the parameters pertaining to the search.

Below the histogram, FastX displays a listing of the best scores. Strand:- after the sequence name in this list indicates that the match was found between search set sequence and the reverse complement of the query sequence.

Following the list of best scores, FastX displays the alignments of the regions of best overlap between the query and search sequences. /rev following the query sequence name indicates that the search sequence is aligned with the reverse complement of the query sequence.

This program displays only the region of overlap between the two aligned sequences (plus some residues on either side of the region to provide context for the alignment) unless you use -SHOWall. The display of identities and conservative replacements between the aligned sequences depends on the value of -MARKx. By default ( -MARKx=3), the pipe character (|) is used to denote identities and the colon (:) to denote conservative replacements.

INPUT FILES

[ Previous | Top | Next ]

FastX accepts a single nucleic acid sequence as the query sequence. The search set is either a single protein sequence or multiple protein sequences. You can specify multiple sequences in a number of ways: by using a list file, for example @project.list; by using an MSF or RSF file, for example project.msf{*}; or by using a sequence specification with an asterisk (*) wildcard, for example GenEMBL:*. If FastX rejects your nucleotide sequence, see Appendix VI for information on how to change or set the type of a sequence.

RELATED PROGRAMS

[ Previous | Top | Next ]

FastA does a Pearson and Lipman search for similarity between a query sequence and a group of sequences of the same type (nucleic acid or protein). For nucleotide searches, FastA may be more sensitive than BLAST.

BLAST searches one or more nucleic acid or protein databases for sequences similar to one or more query sequences of any type. BLAST can produce gapped alignments for the matches it finds. NetBLAST searches for sequences similar to a query sequence. The query and the database searched can be either peptide or nucleic acid in any combination. NetBLAST can search only databases maintained at the National Center for Biotechnology Information (NCBI) in Bethesda, Maryland, USA.

SSearch does a rigorous Smith-Waterman search for similarity between a query sequence and a group of sequences of the same type (nucleic acid or protein). This may be the most sensitive method available for similarity searches. Compared to BLAST and FastA, it can be very slow.

TFastA does a Pearson and Lipman search for similarity between a protein query sequence and any group of nucleotide sequences. TFastA translates the nucleotide sequences in all six reading frames before performing the comparison. It is designed to answer the question, "What implied protein sequences in a nucleotide sequence database are similar to my protein sequence?"

TFastX does a Pearson and Lipman search for similarity between a protein query sequence and any group of nucleotide sequences, taking frameshifts into account. It is designed to be a replacement for TFastA, and like TFastA, it is designed to answer the question, "What implied protein sequences in a nucleotide sequence database are similar to my protein sequence?"

FrameSearch searches a group of protein sequences for similarity to one or more nucleotide query sequences, or searches a group of nucleotide sequences for similarity to one or more protein query sequences. For each sequence comparison, the program finds an optimal alignment between the protein sequence and all possible codons on each strand of the nucleotide sequence. Optimal alignments may include reading frame shifts.

WordSearch identifies sequences in the database that share large numbers of common words in the same register of comparison with your query sequence. The output of WordSearch can be displayed with Segments.

ProfileSearch and MotifSearch use a profile (derived from a set of aligned sequences) instead of a query sequence to search a collection of sequences. FindPatterns uses a pattern described by a regular expression to search a collection of sequences.

StringSearch, LookUp, and Names identify sequences by searching the annotation (non-sequence) portions of seqence files or sequence databases.

RESTRICTIONS

[ Previous | Top | Next ]

The query sequence cannot be longer than 32,000 symbols. You cannot select a list size of more than 1,000 best scores nor view more than 1,000 alignments. The word size must be either 1 or 2.

For the estimates of statistical significance to be valid, the search set must contain a large sample of unrelated sequences. The statistical estimates will not be calculated at all if there are fewer than 10 sequences in the search set (20 sequences if only one strand is searched).

With -NOOPTall, the estimates of statistical significance will not be accurate.

ALGORITHM

[ Previous | Top | Next ]

For a description of the algorithm, see the FastA program documentation. FastX always uses an unrestricted Smith-Waterman algorithm for the final alignment, so this step may take a long time.

CONSIDERATIONS

[ Previous | Top | Next ]

The Wisconsin Package(TM) version of FastX searches using both strands of nucleic acid queries unless you use -ONEstrand. Dr. Pearson's FASTX searches with one strand only.

The E() scores are affected by similarities in sequence composition between the query sequence and the search set sequence. Unrelated sequences may have "significant" scores because of composition bias.

If there is a database entry that overlaps your query in several places, but there are large gaps between the matching regions, only the best overlap appears in the alignment display.

There are two ways to control the size of the list of best scores. By default, scores are listed until a specific E() value is reached. You may set the value in response to the program prompt or by using -EXPect; otherwise the program uses 10.0 for protein searches, 2.0 for nucleic acid searches. (If you are running the program interactively, it will show no more than 40 scores initially, and ask if you want to see more scores if there are any more that are less than the E() value.)

If you use -LIStsize, the E() value is ignored, and the program will list the number of scores you requested.

You can control the number of alignments using -NOALIgn and -ALIgn. The program behaves differently depending on whether it is being run noninteractively (in batch or with -Default on the command line) or interactively. In the noninteractive case, the program displays the number of alignments set by -ALIgn. (If this is not present, it shows 40 alignments or the number of scores that were listed, whichever is smaller.) If you run the program interactively, it displays the list of best scores, then asks you how many alignments you want to see. (This prompt does not appear if you use -NOALIgn or -ALIgn.)

Increasing Sensitivity By Adjusting Word Size

By default, FastX uses a word size of 2. If it finds few or no matches, especially if your query sequence is short, rerun the search using -WORdsize=1 to increase the sensitivity. Note that this will dramatically increase the amount of CPU time required to run the program.

Adjusting Gap Creation, Gap Extension, and Frameshift Penalties

Unlike other GCG programs, FastX does not read the default gap creation, gap extension, and frameshift penalties from the scoring matrix file. It uses default penalties that were empirically determined to be appropriate for the BLOSUM50 scoring matrix. If you select a different scoring matrix with -MATRix, you may need to change the gap penalties. The histogram display gives a qualitative view of the quality of fit between the actual distribution of scores and the expected distribution of scores. This information may indicate whether or not suitable gap creation and extension penalties were used for the search. When the histogram shows poor agreement between the actual distribution and the theoretical distribution, you might consider using -GAPweight and/or -LENgthweight to specify higher gap creation and extension penalties, respectively. For example, you might increase the gap creation penalty from 15 to 20 and the gap extension penalty from 2 to 4. You may also need to use -FRAMEweight to adjust the frameshift penalty.

Differences in Applying Gap Extension Penalties

There are two different philosophies on how to penalize gaps in an alignment. One way is to penalize a gap by the gap creation penalty plus the extension penalty times the length of the gap (gapweight + (lengthweight x gap length)). The other way is to use the gap creation penalty plus the extension penalty times the gap length excluding the first residue in the gap (gapweight + (lengthweight x (gap length - 1)).

"Native" GCG programs, such as Framesearch and Bestfit, handle gap extension penalties the first way, while the FastA-family programs use the second way. Therefore a value for -LENgthweight that gives good results with one of the FastA-family programs may not give equivalent results with a native GCG program, and vice versa.

Increasing Program Speed Using Multithreading

This program is multithreaded. It has the potential to run faster on a machine equipped with multiple processors because different parts of the analysis can be run in parallel on different processors. By default, the program assumes you have one processor, so the analysis is performed using one thread. You can use -PROCessors to increase the number of threads up to the number of physical processors on the computer.

Under ideal conditions, the increase in speed is roughly linear with the number of processors used. But conditions are rarely ideal. If your computer is heavily used, competition for the processors can reduce the program's performance. In such an environment, try to run multithreaded programs during times when the load on the system is light.

As the number of threads increases, the amount of memory required increases substantially. You may need to ask your system administrator to increase the memory quota for your account if you want to use more than two threads.

Never use -PROCessors to set the number of threads higher than the number of physical processors that the machine has -- it does not increase program performance, but instead uses up a lot of memory needlessly and makes it harder for other users on the system to get processor time. Ask your system administrator how many processors your computer has if you aren't sure.

SUGGESTIONS

[ Previous | Top | Next ]

Identifying the Search Set

If you want to search a part of a database instead of an entire database, see the "Using Database Sequences" topic of Chapter 2, Using Sequence Files and Databases of the User's Guide for a list of the logical names used for the databases and the divisions of each database. The search set can also consist of a group of sequence files that are not in a database. Use a multiple sequence specification to name these. For information about naming groups of sequences for the search set, see the topics "Specifying Files" and "Using Wildcards" in Chapter 1, Getting Started, and "Using Database Sequences," "Using Multiple Sequence Format (MSF) Files", "Using Rich Sequence Format (RSF) Files", and "Using List Files" in Chapter 2, Using Sequence Files and Databases of the User's Guide.

Batch Queue

FastX is one of the few programs in the Wisconsin Package that can take more than a few minutes to run. Most comparisons should probably be run in the batch queue. You can specify that this program run at a later time in the batch queue by using -BATch. Run this way, the program prompts you for all the required parameters and then automatically submits itself to the batch or at queue. For more information, see "Using the Batch Queue" in Chapter 3, Using Programs in the User's Guide. Very large comparisons may exceed the CPU limit set by some systems.

Interrupting a Search: <Ctrl>C

You can type <Ctrl>C to interrupt a search and see the results from the part of the search that has already been completed. Because the program is multithreaded, the search may not be interrupted immediately, but will continue until one of the threads finishes processing its data and returns for more data.

ACKNOWLEDGEMENT

[ Previous | Top | Next ]

The FASTA program family (FastA, TFastA, FastX, TFastX, and SSearch) was written by Professor William Pearson of the University of Virginia Department of Biochemistry (Pearson and Lipman, Proc. Natl. Acad. Sci., USA 85; 2444-2448 (1988)). In collaboration with Dr. Pearson, the programs were modified and documented for distribution with GCG Version 6.1 by Mary Schultz and Irv Edelman, and for Versions 8 through 10 by Sue Olson.

COMMAND-LINE SUMMARY

[ Previous | Top | Next ]

All parameters for this program may be added to the command line. Use -CHEck to view the summary below and to specify parameters before the program executes. In the summary below, the capitalized letters in the parameter names are the letters that you must type in order to use the parameter. Square brackets ([ and ]) enclose parameter values that are optional. For more information, see "Using Program Parameters" in Chapter 3, Using Programs in the User's Guide.


Minimal Syntax: % fastx [-INfile1=]singlepass.seq -Default

Prompted Parameters:

[-INfile2=]PIR:*               specifies the search set
[-OUTfile=]singlepass.fastx    specifies the output file name
-BEGin=1 -END=444              sets the range of interest
-WORdsize=2                    sets the word size
-EXPect=2.0                    lists scores until E() value reaches 2.0

Local Data Files:

-MATRix=blosum50.cmp           assigns the scoring matrix for proteins

Optional Parameters:

-PROCessors=2      sets the number of threads devoted to the analysis
                     on a multiprocessor computer
-MINLength=1000    searches only sequences of 1000 or more residues
-MAXLength=5000    searches only sequences of 5000 or fewer residues
-SINce=6.90        limits search to sequences dated on or after June 1990
-ONEstrand         searches using only the top strand of nucleotide queries
-PAMfactor         uses scoring matrix to calculate initial diagonal scores
-GAPweight=15      sets the gap creation penalty
-LENgthweight=2    sets the gap extension penalty
-FRAmeweight=20    sets the frame shift penalty
-OPTall=20         computes opt score when the initn score is 20
                     or higher; sorts on opt score
-NOOPTall          doesn't compute opt score during search; sorts on initn
-LIStsize=40       shows the best 40 scores (overrides EXPect)
-ALIgn=20          shows the best 20 alignments
-NOALIgn           suppresses sequence alignments
-SHOWall           shows complete sequences in alignment, not just overlaps
-MARKx=3           sets the alignment display mode
-NOHIStogram       suppresses printing the histogram
-LINesize=60       sets number of sequence symbols per line of the alignment
-NODOCLines        suppresses sequence documentation in the alignment
-BATch             submits the program to run in the batch queue
-NOMONitor         suppresses the screen trace for each search set sequence

LOCAL DATA FILES

[ Previous | Top | Next ]

The files described below supply auxiliary data to this program. The program automatically reads them from a public data directory unless you either 1) have a data file with exactly the same name in your current working directory; or 2) name a file on the command line with an expression like -DATa1=myfile.dat. For more information see Chapter 4, Using Data Files in the User's Guide.

Local Scoring Matrices

This program reads one or more scoring matrices for the comparison of sequence characters. The program automatically reads the program's default scoring matrix in a public data directory unless you either 1) have a data file with exactly the same name as the program default scoring matrix in your current working directory; or 2) have a data file with exactly the same name as the program default scoring matrix in the directory with the logical name MyData; or 3) name a file on the command line with an expression like -MATRix=mymatrix.cmp. If you don't include a directory specification when you name a file with -MATRix, the program searches for the file first in your local directory, then in the directory with the logical name MyData, then in the public data directory with the logical name GenMoreData, and finally in the public data directory with the logical name GenRunData. For more information see "Using a Special Kind of Data File: A Scoring Matrix" in Chapter 4, Using Data Files in the User's Guide.

FastX reads a scoring matrix containing the values for every possible match from your working directory or the public database. The file blosum50.cmp contains the default values for matches. blosum50.cmp is a BLOSUM50 matrix. You can use the Fetch program to obtain a copy of this file in order to modify it to suit your own needs.

PARAMETER REFERENCE

[ Previous | Top | Next ]

You can set the parameters listed below from the command line. For more information, see "Using Program Parameters" in Chapter 3, Using Programs in the User's Guide.

-WORdsize=2

sets the size of the word (k-tuple) to use for the hashing step.

-MATRix=mymatrix.cmp

allows you to specify a scoring matrix file name other than the program default. If you don't include a directory specification when you name a file with -MATRix, the program searches for the file first in your local directory, then in the directory with the logical name MyData, then in the public data directory with the logical name GenMoreData, and finally in the public data directory with the logical name GenRunData.

For more information see the Local Scoring Matrices section.

-EXPect=2.0

shows all scores whose E() value is less than 2.0. Ignored if -LIStsize is used.

-PROCessors=2

tells the program to use 2 threads for the database search on a multiprocessor computer.

-MINLength=1000

restricts the search to search set sequences that are equal to or longer than 1000 residues.

-MAXLength=5000

restricts the search to search set sequences that are equal to or shorter than 5000 residues.

-SINce=6.1990

limits the search to sequences that have been entered into the database or modified since June 1990. As this is being written, only the EMBL, GenBank, and SWISS-PROT databases support this parameter.

-ONEstrand

searches using only the top strand of the query sequence.

-PAMfactor

uses a scoring matrix for the calculation of initial diagonal scores. Instead of using a constant factor for each match in a word, values are obtained from a scoring matrix. This is the default option for protein sequences.

-GAPweight=12

specifies the gap creation penalty that is subtracted from the alignment score whenever a gap is created.

-LENgthweight=2

specifies the gap extension penalty that is subtracted from the alignment score for each residue added to an existing gap.

-FRAMEweight=20

specifies the penalty that is subtracted from the alignment score whenever a frameshift is inserted.

-OPTall=20

immediately performs an alignment and calculates the opt score when the initn score is greater than or equal to 20. This parameter allows you to override the default threshold calculated by the program. Scores are sorted and saved by opt score during the search. -NOOPTall doesn't compute the opt score until the search is complete. In this case scores are sorted and saved by initn score instead of by opt score.

-LIStsize=40

shows the best 40 scores. Overrides -EXPect.

-ALIgn=10

limits the number of alignments to display in the output file to the 10 best matches in the list. Use the -NOALIgn to suppress the sequence alignments in the output file.

-SHOWall

shows entire sequences in the alignment display, instead of just the best region of overlap and its surroundings.

-MARKx=3

determines the alignment display mode -- especially the symbols that identify matches and mismatches. The default value, 3, uses a pipe character (|) to show identities and a colon (:) to show conservative replacements. -MARKx=0 uses a colon to show identities and a period (.) to show conservative replacements. -MARKx=1 will not mark identities; instead, conservative replacements are connected with a lowercase x, and non-conservative substitutions are connected with an uppercase X. If -MARKx=2, the residues in the second sequence are shown only if they differ from the first sequence.

Use -MARKx=10 to get aligned sequences in the FastA "parsable" output format. A document describing this format appears after FastA in the Program Manual.

-NOHIStogram

suppresses printing the histogram.

-LINesize=60

lets you set the number of sequence symbols in each line of the alignment to any number between 60 and 200.

-NODOCLines

suppresses the documentation from the search set sequence accompanying the alignment in the output file. Use -DOCLines=5 to copy only five non-blank lines of documentation.

-BATch

submits the program to the batch queue for processing after prompting you for all required user inputs. Any information that would normally appear on the screen while the program is running is written into a log file. Whether that log file is deleted, printed, or saved to your current directory depends on how your system manager has set up the command that submits this program to the batch queue. All output files are written to your current directory, unless you direct the output to another directory when you specify the output file.

-MONitor=500

monitors this program's progress on your screen. Use this parameter to see this same monitor in the log file for a batch process. If the monitor is slowing down the program because your terminal is connected to a slow modem, suppress it with -NOMONitor.

The monitor is updated every time the program processes 500 sequences or files. You can use a value after the parameter to set this monitoring interval to some other number.

Printed: December 9, 1998 16:24 (1162)

[ Program Manual | User's Guide | Data Files | Databases ]


Documentation Comments: doc-comments@gcg.com
Technical Support: help@gcg.com

Copyright (c) 1982-2001 Genetics Computer Group, Inc. A subsidiary of Pharmacopeia, Inc. All rights reserved.

Licenses and Trademarks Wisconsin Package is a trademark of Genetics Computer Group, Inc. GCG and the GCG logo are registered trademarks of Genetics Computer Group, Inc.

All other product names mentioned in this documentation may be trademarks, and if so, are trademarks or registered trademarks of their respective holders and are used in this documentation for identification purposes only.

Genetics Computer Group

www.gcg.com